The Monitor tab contains the parameters to be set to transmit and receive monitor audio, or audio shared with users connected to the same P2P channel.
Monitor audio is not transmitted to the main channel (Live), but is received and transmitted internally to channel users who have enabled the MONITOR button.
This makes it possible to communicate with multiple users without broadcasting the audio from a monitor microphone.
To proceed with configuration:
1.Select an Input device to send signal to the monitor channel. The lower meter shows signal presence and its level.
2.Set in Channel the channels number. Use 1 if the captured signal is MONO, 2 if STEREO.
3.Set in Frequency the input signal sample rate.
4.If needed, use Balance to configure the input signal balance between Left and Right.
5.Select an Output device to listen to the monitor channel.
6.Set in Bitrate the transmission quality.
